jack boulter, Author at EIC Partnership https://eic.co.uk/author/jboulter/ Business Energy Consultants Thu, 07 Nov 2024 17:33:47 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.2 https://eic.co.uk/wp-content/uploads/2024/01/cropped-Group-1703-32x32.png jack boulter, Author at EIC Partnership https://eic.co.uk/author/jboulter/ 32 32 Energy Efficiency Day: How Can You Lower Your Energy Consumption? https://eic.co.uk/energy-efficiency-day-how-can-you-lower-your-energy-consumption/ https://eic.co.uk/energy-efficiency-day-how-can-you-lower-your-energy-consumption/#respond Fri, 05 Jan 2024 15:37:15 +0000 https://eic.co.uk/?p=7688

Overview

ENERGY EFFICIENCY DAY: HOW CAN YOU LOWER YOUR ENERGY CONSUMPTION?

Overview

Rising energy bills have had an impact on us all. One thing energy consumers can do is look at how to reduce energy consumption.

Energy Efficiency Day is the perfect time to look at your costs and figure out if you’re using your energy in the most intelligent way possible.

WHAT IS ENERGY EFFICIENCY DAY?

Energy Efficiency Day takes place on the first Wednesday in October. Dozens of energy efficiency advocacy groups come together to raise awareness about reducing consumption.

It’s a day to share tips and tools to promote the benefits of energy efficiency and encourage people to think about what they can do to save energy.

WHY IS ENERGY EFFICIENCY IMPORTANT?

Energy efficiency has multiple benefits that can have a positive effect on businesses and the planet.

REDUCED COSTS

If you want to save money, the easiest thing you can do is reduce your energy consumption. eEnergy estimates that 30% of all the energy that is currently wasted comes from commercial buildings. Some of the highest energy consumers’ annual savings could be as high as £3.1 million just by introducing energy-saving solutions.

REDUCED CARBON EMISSIONS

Burning fossil fuels is our biggest source of energy. On average, around 50% of our electricity in the UK is generated using fossil fuels, creating carbon emissions and damaging the planet. Using your energy more efficiently produces less damaging waste and carbon emissions, improving your carbon footprint.

Lowering carbon emissions now puts businesses in a good place for the government’s net-zero plan. There’s no harm in getting started early and reducing carbon emissions where you can.

HOW CAN YOU SAVE ENERGY?

There are small changes businesses can make that can help to lower energy consumption:

  • Switch to energy-efficient light bulbs.
  • Switch off lights in areas that aren’t occupied or invest in sensors.
  • Use power-saving mode on computers.
  • All computers should be turned off when not in use.
  • Avoid using the printer; only use it when it’s essential.

Employees would have to get involved, be responsible for their own equipment, and ensure they are turning everything off at the end of the day.

These are only a handful of changes you can make. EIC can find solutions that will save you money and help you reach net zero targets.

HOW CAN EIC PARTNERSHIP HELP YOU LOWER YOUR ENERGY CONSUMPTION?

We understand the positive impact energy efficiency can have on businesses and the environment. We are passionate about helping businesses meet their net zero goals and cut energy consumption.

We can create solutions to help you buy, manage, and control your energy. Our solutions are categorised into three service areas: Intelligent Buildings, Smart Procurement and Trusted Compliance.

Share to :

More News

You might also be interested in these posts

FAQs

See a selection of our most frequently asked questions.

Which suppliers does EIC work with?

EIC stands out from other energy consultancies because we’re completely independent.

This independence allows us to offer supply options from a wide range of energy suppliers, all of whom are unrelated.

Our energy advice is unbiased, giving you the freedom to make informed decisions for your business.

We have a proven track record of skilfully negotiating cost-effective contracts, ensuring you consistently get the best energy prices when you partner with us.

What if I am already with an energy consultancy?

If you’re already working with an energy consultancy, it’s a good idea to start exploring your options well in advance, preferably 18 to 24 months before your current supply contract expires.

It’s essential to distinguish between your energy supply contract and your energy consultancy agreement.
You have the flexibility to switch your energy consultancy while keeping your current energy supplier intact.

What happens after the energy procurement step?

Our comprehensive account managed service provides our clients with peace of mind throughout the entire energy procurement process.

When you choose our fixed energy procurement service, we’ll assign an account manager to you, someone equipped with the expertise and abilities to provide a customised solution that aligns with your unique needs and requirements.

The professionals who make up our dedicated procurement team are well-versed in resolving inquiries and skilled in engaging with energy suppliers to negotiate contracts on your behalf.

When is the best time to renew my energy contract?

The timing for transitioning to a new energy contract is flexible; you aren’t bound by a fixed schedule or renewal date.

Given the ongoing high volatility in the global energy market, it’s increasingly crucial to look beyond traditional renewal dates when contemplating a new contract.

]]>
https://eic.co.uk/energy-efficiency-day-how-can-you-lower-your-energy-consumption/feed/ 0
Six Things To Consider When Negotiating A Flexible Energy Supply Contract https://eic.co.uk/six-things-to-consider-when-negotiating-a-flexible-energy-supply-contract/ https://eic.co.uk/six-things-to-consider-when-negotiating-a-flexible-energy-supply-contract/#respond Fri, 05 Jan 2024 15:37:10 +0000 https://eic.co.uk/?p=7747

SIX THINGS TO CONSIDER WHEN NEGOTIATING A FLEXIBLE ENERGY SUPPLY CONTRACT

Overview

When you take out a flexible energy contract, our energy traders will purchase your gas or electricity directly from the wholesale markets – often securing lower rates.

A flexible contract allows businesses to take advantage of the ever-changing energy markets, when fixed price contracts are too restrictive for your needs. For larger energy users, we can help you take advantage of a volatile energy market and make sure you benefit from any peaks and troughs in the markets. Our aim is to maximise contract flexibility, whilst minimising your costs.

Let’s take a look at six things you should consider when negotiating a flexible energy contract.


Contract duration

The duration of your flexible energy supply contract is often driven by market liquidity – how easy it is to trade energy on the markets. The trading windows cover four seasons (24 months) for electricity, and six seasons (36 months) for gas.

Longer duration flexible energy contracts provide optimal trading opportunities – so we can manage prices over time and make strategic trading decisions. It is also worth putting in place a supply contract for any periods when you need to work within a budget.


Non-commodity charges

It’s important to think carefully about your non-commodity costs when securing your flexible energy supply contract. There are many options available. These range from fully fixing all or some non-commodity charges, to having all charges fully passed through at cost.

Fixing non-commodity costs will incur a premium and there are opportunities to save on time based non-commodity costs, although these are reducing with changes to the way that distribution and transmission charges are calculated.

Non-commodity costs will make up around 67% of your overall costs by 2025. So, it’s vital to look at your wider energy strategy, and consider taking a more flexible approach.


Trading flexibility

Although the commodity element of your costs now makes up a smaller portion of overall spend, this is the element that we can influence most through active trading. We have access to supplier trading desks, and the ability to refloat volume means that we can sell back any energy that we have previously purchased on your behalf. Varying the size of tradeable clips should also be considered to maximise trading flexibility. Whilst there are minimum clip sizes that we need to work within, this gives us the option for multiple purchases, rather than purchasing all of the required energy immediately. This gives you more flexibility.

Some suppliers will also charge trading transaction fees, which can result in additional costs over the duration of the contract – so these should be factored into supply contract negotiations. We will also take into consideration your preferred trading strategy, ensuring that your contract provides the required levels of flexibility.


Volumes

When tendering a flexible energy supply contract, suppliers can make a more suitable contract offer if they have accurate information to hand – such as precise volume forecasts. Some suppliers will apply a volume tolerance to a supply contract and set limits on reforecasting.

So, if there are any planned or known volume changes anticipated, it is important to take these into consideration. Putting in place accurate trading volumes from the start means that we can implement effective buying strategies, from both a trading and budgeting point of view.


Administration

When choosing a supplier to renew with, it is important to consider your requirements relating to payment terms, invoicing and data access. Some suppliers can be more flexible than others regarding invoicing and payment terms, and certain factors – such as credit – can impact on the options available.

There are also variations in what a supplier can offer in terms of data access. Whether this is access to consumption data or invoices via a dedicated contact, or via an online portal.


Negotiation and analysis

Suppliers will charge specific fees for managing a contract and offer different premiums – for example, for renewable energy options. It’s therefore vital to analyse supplier offers on a like-for-like basis, to ensure you secure the most competitive contract available.

Tender negotiations should consider all aspects of a supply contract, to achieve the best contract terms in line with your requirements. The main aim is to procure a competitive contract with a supplier that meets all of your day-to-day needs, whilst offering trading flexibility to suit your strategy.


How can EIC help?

Achieving more flexibility in the energy markets is an integral part of EIC’s client commitment. Through a variety of services, including flexible procurement, smart metering, and many years of experience working with carbon monitoring and compliance, EIC goes to great lengths to offer consumers freedom and flexibility.

Our goal is to find the bespoke energy package that best suits your business or property, while simultaneously lowering your costs and carbon emissions.

We have considerable experience in negotiating individual flexible energy supply contracts for our clients. We’ll analyse each offer, negotiate with each supplier and rank final offers against an appropriate scoring benchmark pre-agreed with you. From this, we’ll shortlist the leading suppliers and negotiate the best overall solution – ensuring that you’re fully involved at each stage.

Click here to find out how our Flexible Energy Procurement solutions can transform your electricity and gas-buying strategies.

Share to :

More News

You might also be interested in these posts

FAQs

See a selection of our most frequently asked questions.

Which suppliers does EIC work with?

EIC stands out from other energy consultancies because we’re completely independent.

This independence allows us to offer supply options from a wide range of energy suppliers, all of whom are unrelated.

Our energy advice is unbiased, giving you the freedom to make informed decisions for your business.

We have a proven track record of skilfully negotiating cost-effective contracts, ensuring you consistently get the best energy prices when you partner with us.

What if I am already with an energy consultancy?

If you’re already working with an energy consultancy, it’s a good idea to start exploring your options well in advance, preferably 18 to 24 months before your current supply contract expires.

It’s essential to distinguish between your energy supply contract and your energy consultancy agreement.
You have the flexibility to switch your energy consultancy while keeping your current energy supplier intact.

What happens after the energy procurement step?

Our comprehensive account managed service provides our clients with peace of mind throughout the entire energy procurement process.

When you choose our fixed energy procurement service, we’ll assign an account manager to you, someone equipped with the expertise and abilities to provide a customised solution that aligns with your unique needs and requirements.

The professionals who make up our dedicated procurement team are well-versed in resolving inquiries and skilled in engaging with energy suppliers to negotiate contracts on your behalf.

When is the best time to renew my energy contract?

The timing for transitioning to a new energy contract is flexible; you aren’t bound by a fixed schedule or renewal date.

Given the ongoing high volatility in the global energy market, it’s increasingly crucial to look beyond traditional renewal dates when contemplating a new contract.

]]>
https://eic.co.uk/six-things-to-consider-when-negotiating-a-flexible-energy-supply-contract/feed/ 0
Rego Prices Rise Amidst Post-Brexit Uncertainty https://eic.co.uk/rego-prices-rise-amidst-post-brexit-uncertainty/ https://eic.co.uk/rego-prices-rise-amidst-post-brexit-uncertainty/#respond Fri, 05 Jan 2024 15:37:09 +0000 https://eic.co.uk/?p=7758

REGO PRICES RISE AMIDST POST-BREXIT UNCERTAINTY

Overview

The Renewable Energy Guarantees of Origin (REGO) scheme was designed to provide consumers with transparency about the portion of electricity their suppliers source from renewable generation.

HOW DO REGOS WORK?

Renewable energy generators are issued with one REGO certificate for every megawatt hour (MWh) of renewable output. This certificate is then sold with an energy contract to prove to the final customer that a share of their energy was produced from renewable sources.

WHY ARE REGO PRICES RISING?

In recent weeks the cost of REGO certificates has increased dramatically, leading to rising renewable electricity contract renewal prices. There are a number of factors driving the increases, including:

  • Lower levels of renewable generation than expected in the UK in the 2020–21 period, reducing the number of REGOs available on the market
  • Higher levels of demand for renewable electricity
  • End-of-year purchasing by suppliers to meet their obligations
  • Uncertainty surrounding the acceptance of European Guarantees of Origin certificates (GoOs) in future
  • Increase in wholesale electricity prices that continue to recover to pre-pandemic levels

These factors mean that customers securing renewable electricity contract renewals are likely to see their prices increase.

ARE REGOS USED FOR GREENWASHING?

REGOs have faced criticism for allowing greenwashing. This is because some suppliers buy power on the wholesale market, which is a mix of all sources including fossil fuels and nuclear. They then separately acquire REGOs to label this power ‘green’. Scottish Power and Good Energy have recently called for regulatory reforms to close these “loopholes” in the market.

Despite these calls for reform, a recent Cornwall Insight’s survey found that 74% of participants felt there had been no improvement in REGOs regulations.

HOW CAN EIC HELP?

The sharpest insights are crucial in today’s volatile markets. We work to ensure that our clients are aware of key market movements and are ready to capitalise on every opportunity.

The EIC Market Intelligence team has extensive knowledge of the electricity and carbon markets and the fundamentals driving them. Interpreting this information is a key component of a successful energy management strategy.

EIC can help your business stay ahead of the curve with market insights and smart procurement so you can make energy management decisions with confidence. To learn more, contact us at EIC today.

Share to :

More News

You might also be interested in these posts

FAQs

See a selection of our most frequently asked questions.

Which suppliers does EIC work with?

EIC stands out from other energy consultancies because we’re completely independent.

This independence allows us to offer supply options from a wide range of energy suppliers, all of whom are unrelated.

Our energy advice is unbiased, giving you the freedom to make informed decisions for your business.

We have a proven track record of skilfully negotiating cost-effective contracts, ensuring you consistently get the best energy prices when you partner with us.

What if I am already with an energy consultancy?

If you’re already working with an energy consultancy, it’s a good idea to start exploring your options well in advance, preferably 18 to 24 months before your current supply contract expires.

It’s essential to distinguish between your energy supply contract and your energy consultancy agreement.
You have the flexibility to switch your energy consultancy while keeping your current energy supplier intact.

What happens after the energy procurement step?

Our comprehensive account managed service provides our clients with peace of mind throughout the entire energy procurement process.

When you choose our fixed energy procurement service, we’ll assign an account manager to you, someone equipped with the expertise and abilities to provide a customised solution that aligns with your unique needs and requirements.

The professionals who make up our dedicated procurement team are well-versed in resolving inquiries and skilled in engaging with energy suppliers to negotiate contracts on your behalf.

When is the best time to renew my energy contract?

The timing for transitioning to a new energy contract is flexible; you aren’t bound by a fixed schedule or renewal date.

Given the ongoing high volatility in the global energy market, it’s increasingly crucial to look beyond traditional renewal dates when contemplating a new contract.

]]>
https://eic.co.uk/rego-prices-rise-amidst-post-brexit-uncertainty/feed/ 0
Science-based Targets: Everything You Need To Know https://eic.co.uk/science-based-targets-everything-you-need-to-know/ https://eic.co.uk/science-based-targets-everything-you-need-to-know/#respond Fri, 05 Jan 2024 15:37:08 +0000 https://eic.co.uk/?p=7782

SCIENCE-BASED TARGETS: EVERYTHING YOU NEED TO KNOW

Overview

Some large corporations are leading the way in a bid to tackle climate change with science-based targets. What are the benefits of committing to these emissions reductions and how can your business get involved?


WHAT ARE SCIENCE-BASED TARGETS?

Science-based targets came about as a result of the Paris agreement in 2015. In this legally binding treaty, 195 parties committed to limiting global warming to below 2 degrees Celsius compared to pre-industrial levels. Then in 2018, the Intergovernmental Panel on Climate Change said that global warming should not exceed 1.5 degrees Celsius.

To achieve this, GHG emissions must halve by 2030, and drop to net zero by 2050. A ‘science-based’ emissions target stays in line with the scale of reductions required to meet these objectives. These goalposts track progress and give the private sector a clear idea of how quickly they need to reduce their GHG emissions to prevent the worst impacts of climate change.

In the global race towards net zero, science-based targets will become crucial for business growth across the sectors. Not only do they help tackle climate change, but they boost a company’s competitiveness in a changing market.


A UNITED INITIATIVE

The Science Based Targets initiative (SBTi) was set up by CDP, World Resources Institute (WRI), the World Wide Fund for Nature (WWF), and the United Nations Global Compact (UNGC). The group supports companies that have set science-based targets. They have found that the positive effects for these businesses include increased innovation, strengthened investor confidence and improved profitability.

The STBi also:

  1. Defines and promotes best practice in science-based target setting via the support of a Technical Advisory Group.
  2. Offers resources, workshops and guidance to reduce barriers to adoption.
  3. Independently assesses and approves companies’ targets.


WHAT ARE THE BENEFITS OF SETTING SCIENCE-BASED TARGETS?

There are many benefits to setting science-based targets. By significantly reducing emissions, you are not only building a brighter future for the planet but a potentially profitable one for your business.

Here are some of the benefits of setting science-based targets:

  • Illustrate excellent CSR – For large corporates there is a growing responsibility to take action against climate change, science-based targets are a way to do this.
  • Deliver a competitive advantage – Integrating environmental policies into your business strategy helps your business stand out in a crowded marketplace.
  • Involve the whole company – Engage with internal and external stakeholders to help your business achieve or even exceed targets.
  • Reduce large costs – Lowering emissions often requires a closer look at your energy portfolio and making your utilities as efficient and low carbon as possible. This can result in significant savings for your business.
  • Investor confidence – 52% of execs have seen investor confidence boosted by targets. As TCFD recommendations come into play and climate-related risks become more important, this will only become more prevalent.
  • Increase innovation – 63% of company execs say science-based targets drive innovation.


HOW DO YOU SET A SCIENCE-BASED TARGET?

There are three approaches to setting a science-based target (SBT):

  1. Sector-based approach – The global carbon budget is divided by sector and emission reductions allocated to individual companies based on its sector’s budget.
  2. Absolute-based approach – All companies will equally work towards the same per cent reduction in absolute emissions.
  3. Economic-based approach – A carbon budget is equated to global GDP and a company’s share of emissions is determined by its gross profit since the sum of all companies’ gross profits worldwide equate to global GDP.


HOW CAN BUSINESSES GET INVOLVED?

For a business to get involved in the initiative there is a simple 4 step process to follow:

  1. Submit a letter to say you are committed to the scheme.
  2. Develop your own science-based target within 24 months.
  3. Submit your target for validation.
  4. Announce your target.

838 companies are currently taking science-based climate action and 343 companies have approved science-based targets.


HOW EIC CAN HELP

Creating science-based targets is essential for businesses of every size as we progress towards net zero targets. To create these targets, a business must first understand its consumption. At EIC we offer a range of comprehensive services that can help you help your business.

We are already partnering with leading UK private and public sector organisations – supporting them to transform their operations in line with ambitious targets. This will help them future-proof their business and save the planet.

EIC can assist in meeting your science-based targets by:

  • Establishing your carbon footprint to act as your baseline.
  • Provide recommendations to reduce your carbon impact.
  • Set your target to reduce your carbon footprint to meet the 1.5°C objective.
  • Create an ongoing Carbon Management Plan.
  • Create and publish all documentation required for the scheme.
  • Work with you to embed the strategy into your business.

To learn more about EIC’s carbon and net zero services, contact us today.

Share to :

More News

You might also be interested in these posts

FAQs

See a selection of our most frequently asked questions.

Which suppliers does EIC work with?

EIC stands out from other energy consultancies because we’re completely independent.

This independence allows us to offer supply options from a wide range of energy suppliers, all of whom are unrelated.

Our energy advice is unbiased, giving you the freedom to make informed decisions for your business.

We have a proven track record of skilfully negotiating cost-effective contracts, ensuring you consistently get the best energy prices when you partner with us.

What if I am already with an energy consultancy?

If you’re already working with an energy consultancy, it’s a good idea to start exploring your options well in advance, preferably 18 to 24 months before your current supply contract expires.

It’s essential to distinguish between your energy supply contract and your energy consultancy agreement.
You have the flexibility to switch your energy consultancy while keeping your current energy supplier intact.

What happens after the energy procurement step?

Our comprehensive account managed service provides our clients with peace of mind throughout the entire energy procurement process.

When you choose our fixed energy procurement service, we’ll assign an account manager to you, someone equipped with the expertise and abilities to provide a customised solution that aligns with your unique needs and requirements.

The professionals who make up our dedicated procurement team are well-versed in resolving inquiries and skilled in engaging with energy suppliers to negotiate contracts on your behalf.

When is the best time to renew my energy contract?

The timing for transitioning to a new energy contract is flexible; you aren’t bound by a fixed schedule or renewal date.

Given the ongoing high volatility in the global energy market, it’s increasingly crucial to look beyond traditional renewal dates when contemplating a new contract.

]]>
https://eic.co.uk/science-based-targets-everything-you-need-to-know/feed/ 0
EPBD: What You Need To Know https://eic.co.uk/epbd-what-you-need-to-know/ https://eic.co.uk/epbd-what-you-need-to-know/#respond Fri, 05 Jan 2024 15:37:07 +0000 https://eic.co.uk/?p=7790

EPBD: What You Need To Know

Overview

EIC unpacks Energy Performance of Buildings Directive (EPBD), it’s origins, purpose and how firms can make sure they are compliant.

THE KYOTO PROTOCOL

Two years after the 1992 UNFCCC (United Nations Framework Convention on Climate Change), the Kyoto Protocol emerged as an extension to the conventions primary treaty.

The UNFCCC’s objective is to:

“Stabilise greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system”

The extension took effect in 1997 and was as much political as it was scientific, viewing the climate crisis from a purely mathematical perspective. The consensus was that industrially developed nations were far greater contributors to climate change than rural and agricultural ones.

CO2 emissions would not be divided equally between the committed nations but rather based on their industrial activity. Subsequently, the EU and its member states committed to binding emission reduction targets which remain in effect today.

Following Kyoto, the EU established EPBD in January 2003 to ensure sufficient CO2 reductions from European buildings. The primary objective is to incentivise widespread improvement of their energy efficiency. The beauty of this that its criteria apply more to industrially developed nations due to their carbon intensity.

WHAT LEGISLATIVE REQUIREMENTS ARE COVERED BY EPBD?

The UK governments interpretation of embedding EPBD recognises 3 streams of certification, required by both the private and public sectors:

  • DECs (Display Energy Certificates) – required by publicly-owned or funded buildings on an annual or ten yearly basis
  • TM44 / Air Conditioning Inspections – required for all buildings with installed comfort cooling
  • EPCs (Energy Performance Certificates) – required for both domestic and non-domestic new builds, majorly refurbished, sold or let out. The certificates are valid for 10 years from issue and underpin the MEES standard, whereby a building cannot be sold or let with an energy rating below E.

BUILDING BETTER

As lockdown restrictions ease, and the ‘Build Back Better’ initiative gains momentum, compliance with EPBD will only become more relevant.

The most recent recast of EPBD, in 2010, focuses on new builds and major renovations thereby adopting a long term view of the situation.

EPBD also protects consumers, it requires disclosure of efficiency measures within a property to buyers, to inform them of running costs.

The requirement led to the widespread introduction of Energy Performance Certificates (EPC), one of the major successes of EPBD to date. First introduced in 2007, the UK national database now contains energy performance information on a staggering 40% of homes.

Last year marked the EPBD deadline for all member states to have NZEBs – or Nearly Zero Energy Buildings. The criteria for an NZEB is simply that it has a very high energy performance, made possible by quality insulation and on-site renewable generation.

Since Zero Carbon Homes was scrapped in 2016, EPBD is one of the few legislations that targets the energy performance of buildings.

The fervour in reaching net-zero means that this legislation is here to stay and so firms should be asking how they could ensure they are taking part.

UPGRADING FOR EPBD

Improving the energy performance of a structure needn’t be a complex process, however, it must be an informed one.

EIC’s approach to structural efficiency is twofold, assessing pre-existing assets using integrated metering and monitoring technology. Next, EIC adopts an end-to-end approach, carrying out initial certification, devising and implementing improvements. Finally undertaking a certificate review to demonstrate progress.

Depending on site limitations, EIC can consult on the installation of on-site generation, with a particular focus on solar generation. Thereby lessening a structure’s energy consumption, lowering your utility bills and improving its overall energy profile. View full details of these services, as well as testimonials from past clients.

Share to :

More News

You might also be interested in these posts

FAQs

See a selection of our most frequently asked questions.

Which suppliers does EIC work with?

EIC stands out from other energy consultancies because we’re completely independent.

This independence allows us to offer supply options from a wide range of energy suppliers, all of whom are unrelated.

Our energy advice is unbiased, giving you the freedom to make informed decisions for your business.

We have a proven track record of skilfully negotiating cost-effective contracts, ensuring you consistently get the best energy prices when you partner with us.

What if I am already with an energy consultancy?

If you’re already working with an energy consultancy, it’s a good idea to start exploring your options well in advance, preferably 18 to 24 months before your current supply contract expires.

It’s essential to distinguish between your energy supply contract and your energy consultancy agreement.
You have the flexibility to switch your energy consultancy while keeping your current energy supplier intact.

What happens after the energy procurement step?

Our comprehensive account managed service provides our clients with peace of mind throughout the entire energy procurement process.

When you choose our fixed energy procurement service, we’ll assign an account manager to you, someone equipped with the expertise and abilities to provide a customised solution that aligns with your unique needs and requirements.

The professionals who make up our dedicated procurement team are well-versed in resolving inquiries and skilled in engaging with energy suppliers to negotiate contracts on your behalf.

When is the best time to renew my energy contract?

The timing for transitioning to a new energy contract is flexible; you aren’t bound by a fixed schedule or renewal date.

Given the ongoing high volatility in the global energy market, it’s increasingly crucial to look beyond traditional renewal dates when contemplating a new contract.

]]>
https://eic.co.uk/epbd-what-you-need-to-know/feed/ 0
Coal Plant Capacity To Halve By April As More Plants Shut Down https://eic.co.uk/coal-plant-capacity-to-halve-by-april-as-more-plants-shut-down/ https://eic.co.uk/coal-plant-capacity-to-halve-by-april-as-more-plants-shut-down/#respond Fri, 05 Jan 2024 15:37:06 +0000 https://eic.co.uk/?p=7807

SCIENCE-BASED TARGETS: EVERYTHING YOU NEED TO KNOW

Overview

Back in 2015, the Government announced plans to phase out all unabated coal-fired power stations in the UK by 2025. However, our forecasts as part of our Long-Term Forecast Report shows the UK will have just one coal plant left to close. 4.5GW of coal plant capacity is now scheduled to close by March 2020, with the loss of the Cottam, Fiddlers Ferry and Aberthaw power stations.

EDF Energy announced earlier this year it would close its Cottam coal plant by 30 September 2019. SSE is to close its last three coal units at Fiddlers Ferry after the winter season in March 2020, with one unit at the plant already closed. German utility giant RWE was the latest to announce a closure, with the Aberthaw B plant in Wales also closing in March 2020 after 50 years of generation.

The closures will see the UK’s remaining coal plant capacity drop by nearly 50% in less than a year, falling from 11GW to under 6GW. Back in January 2016, ten coal plants provided a capacity of 18GW and three years before that the UK electricity network had over 25GW of capacity from coal-fired plants.

The coal industry has been heavily impacted by various economic and legislative pressure over the last 5-10 years. Enhanced and ambitious Government targets for renewable energy and carbon emission reduction has seen coal plants come under intense scrutiny. Government legislation will remove all coal from the fuel mix by 2025. The intention is to replace coal generation with renewable capacity, cleaner CCGT gas-fired and new nuclear power plant. However, as we predicted at the time, the rate of coal plant closures has accelerated, with expectations that just one coal plant – Ratcliffe – will still be operational by the 2025 deadline.

IMPACT OF EU REGULATIONS

The Industrial Emissions Directive (IED) came into force in January 2011. This set out a range of criteria related to carbon emissions which coal plant were required to opt in to by the end of 2016. The Ratcliffe coal plant is already compliant with the EU’s Large Combustion Plant Directive (LCPD), which the IED is designed to replace. It intends to adhere to the new IED laws and has already undergone upgrades to its systems to reduce carbon emissions.

CARBON PRICE FLOOR (CPF)

The Carbon Price Floor (CPF) was introduced in 2013 as a means to reduce greenhouse gas emissions from electricity generation. Acting as a minimum price for carbon emissions, the CPF acts as a top-up tax on the EU emissions trading scheme. It was originally £16/per tonne emitted and is now frozen at £18/tonne until 2020. It runs alongside the EU emissions trading scheme, where generators purchase permits to emit greenhouse gases.

The CPF’s introduction provided a strong disincentive to high carbon electricity generation, most notably coal-fired power plant.

However, the ongoing use of fossil-fuels in the generation mix meant that it also increased the price of wholesale power, as the cost for generation began to include the value of the CPF.


COAL PLANT CLOSURES

Faced with rising carbon costs, and thin profit lines on top of the substantial emissions regulations, coal plant have reassessed their continued operation. Closures at Lynemouth, Longannet, Ferrybridge and Rugeley all took place by Summer 2016. Uskmouth and Eggborough followed in 2017 and 2018. After the recent announcements, just four UK coal plants will remain open beyond March 2020. The aforementioned Ratcliffe power station, West Burton, two units at the Drax power station and the small-scale Northern Irish plant at Kilroot. Given a one-year reprieve from a planned closure in May 2018, the Kilroot plant has since been sold to new operators and its future is uncertain. However, the power station will not be subject to the Westminster’s 2025 shutdown, as Northern Ireland operates its own energy policy. The remaining coal units at West Burton are only contracted until September 2021 and the future beyond that date is unclear. Drax has already converted four of its six coal units to biomass and the company has confirmed plans to replace the remaining two coal units with gas turbines ahead of the 2025 deadline.

COAL’S POWER STRUGGLE WITH GAS

The resultant loss of available coal-fired capacity has led to a switch to gas-fired plant for baseload generation. Increased renewable capacity and a stronger use of imports from overseas have also greatly reduced the use of coal-fired generation in the fuel mix.

Over the last five years coal-fired generation has gone from leading the UK electricity mix to record stretches of electricity generation without any coal use whatsoever. In Winter 2017/18 coal burn averaged just 2GW, with generation from wind farms over 6GW a day over the same period. By May 2019, as electricity demand fell through the summer, average coal use was just 28MW. National Grid recorded its first week of coal-free generation since the Industrial Revolution that month. A record which was persistently broken during the summer season, reaching a record stretch of 18 straight coal-free days.

There is still a place for coal in the short-term, during points of system stress. However, this will become even more limited, with longer periods of entirely coal-free generation expected. There is currently no push to invest in abated coal-fired plant instead through Carbon Capture and Storage.

With the UK being the first country to commit to net zero carbon emissions by 2050 the focus for long-term electricity generation will be on low carbon and renewable sources. With the removal of coal likely ahead of the 2025 deadline, new build power stations, providing baseload generation will need to be almost entirely gas-fired. In nuclear, only Hinkley Point C power station is under construction, as three other new nuclear plants have been recently shelved. This will likely result in increased gas demand in the UK, and more so globally, as major European and Asian economies switch consumers away from coal to less carbon intensive fuels.

STAY INFORMED WITH EIC INSIGHTS

Our Market Intelligence team keep a close eye on the energy markets and industry updates. For the timeliest updates you can find us on Twitter and LinkedIn.

Click here to find out more about our Long-Term Forecast report and how changing market drivers over the next 5 to 15 years could impact your forecasted energy budgets.

Share to :

More News

You might also be interested in these posts

FAQs

See a selection of our most frequently asked questions.

Which suppliers does EIC work with?

EIC stands out from other energy consultancies because we’re completely independent.

This independence allows us to offer supply options from a wide range of energy suppliers, all of whom are unrelated.

Our energy advice is unbiased, giving you the freedom to make informed decisions for your business.

We have a proven track record of skilfully negotiating cost-effective contracts, ensuring you consistently get the best energy prices when you partner with us.

What if I am already with an energy consultancy?

If you’re already working with an energy consultancy, it’s a good idea to start exploring your options well in advance, preferably 18 to 24 months before your current supply contract expires.

It’s essential to distinguish between your energy supply contract and your energy consultancy agreement.
You have the flexibility to switch your energy consultancy while keeping your current energy supplier intact.

What happens after the energy procurement step?

Our comprehensive account managed service provides our clients with peace of mind throughout the entire energy procurement process.

When you choose our fixed energy procurement service, we’ll assign an account manager to you, someone equipped with the expertise and abilities to provide a customised solution that aligns with your unique needs and requirements.

The professionals who make up our dedicated procurement team are well-versed in resolving inquiries and skilled in engaging with energy suppliers to negotiate contracts on your behalf.

When is the best time to renew my energy contract?

The timing for transitioning to a new energy contract is flexible; you aren’t bound by a fixed schedule or renewal date.

Given the ongoing high volatility in the global energy market, it’s increasingly crucial to look beyond traditional renewal dates when contemplating a new contract.

]]>
https://eic.co.uk/coal-plant-capacity-to-halve-by-april-as-more-plants-shut-down/feed/ 0
Esos Phase 3 – Qualification Date Has Passed And Compliance Is Critical https://eic.co.uk/esos-phase-3-qualification-date-has-passed-and-compliance-is-critical/ https://eic.co.uk/esos-phase-3-qualification-date-has-passed-and-compliance-is-critical/#respond Mon, 23 Jan 2023 15:37:00 +0000 https://eic.co.uk/?p=7705

ESOS PHASE 3 - QUALIFICATION DATE HAS PASSED

Overview

The qualification date for Phase 3 of the ‘Energy Savings Opportunity Scheme’ (ESOS) was 31 December 2022, meaning if your business is in scope for Phase 3, you must comply with the reporting criteria. Your business will be in scope of ESOS from that date if it has either or both:

  • 250 or more employees
  • An annual turnover in excess of £44 million, and an annual balance sheet total in excess of £38 million.


WHAT IS ESOS?

Large UK firms are required to report on their energy consumption and find potential methods to consume less energy under the ‘Energy Savings Opportunity Scheme’, which is a mandated programme. We are now in Phase 3 of its four-year cycle. If your company falls inside the scope of the plan, you must abide by the rules or risk fines.


WHAT HAPPENS IF YOU DON’T COMPLY?

Organisations who fail to comply with ESOS regulations or meet the required criteria risk facing financial penalties from the Environmental Agency (EA). The changes to legislation in 2022 have also increased the reporting requirements for Significant Energy Use (SEU) from 90% to 95%.

Additionally, with limited ESOS Lead Assessors available for ESOS Phase 3 compliance, it’s crucial for companies to act now to ensure compliance and avoid potential fines and penalties.

All non-compliance will be made public by the EA on their website, with the amount you were fined. There are different types of non-compliance all with separate breaches and various penalty amounts. These include:

  • Failure to Notify

Any organisations who do not declare they have met with their ESOS responsibilities will be punished since it will compromise the integrity of the programme. Whether or not the organisation has conducted an energy audit, they might still be fined up to £5,000 as well as a daily fee of £500 for each working day they are in violation (for a maximum of 80 days). This amount would be added to any additional penalties as well.

  • Failure to maintain records

Maintaining your records is essential so that you can carry out an energy audit and provide proof of your ESOS compliance. In the event that this is not done, there will be a £5,000 punishment as well as an “amount representing the cost to the compliance body of establishing that the responsible undertaking has complied with the plan,” which must be settled. To correct this violation, the compliance body will provide measures, which must be followed.

  • Failure to undertake an energy audit

The greatest punishment is assessed when an energy audit is not performed because it is a crucial ESOS obligation. It is worth making sure you comply if required since the fine is £50,000 as well as £500 for each working day an organisation is in violation (up to a maximum of 80 days). With a decreased fine of £5,000, new entrants are treated more leniently. Keep in mind that organisation is no longer regarded as a new participant in the ESOS program’s second phase. Additionally, corrective measures (such as doing an energy audit) must still be taken.

  • Failure to comply with an enforcement/penalty notice

Any organisation that disregards a compliance, enforcement, or penalty notice will be subject to this fine. An organisation will be subject to an initial punishment of £5,000 followed by £500 for each day that it is in breach, up to a maximum of 80 days.

  • False or misleading statement

Your ESOS evaluation and report must be factually correct and accurate. The largest penalties, again £50,000, might be expected from an organisation if the EA finds that you made a false or misleading statement.


WHAT SHOULD YOU DO NOW?

The final deadline to complete and submit your ESOS reporting for Phase 3 is 5 December 2023. Your data should be based on a 12-month period that includes the qualification date (December 31, 2022) and ends before the compliance date for ESOS Phase 3 reporting (5 December 2023). It might begin as early as 1 January 2022 and it could finish as late as 4 December 2023. Within that timeframe, any consecutive 12 months are acceptable. This is referred to as your reference period. During then, you need to:

  1. Calculate the overall energy usage of your business

You will need to calculate the total energy consumption of your business, which includes energy needed for industrial operations, building heating and lighting, and transportation fuel. These should be reported in a standard unit, such as pounds sterling or an energy unit like the kWh.

  1. Locate places with high energy consumption

You can classify up to 5% of your organisation’s energy use as “de minimis” under the ESOS regulations for Phase 3. You might decide to exclude a location, an activity, or the use of a certain fuel. You must still have a “significant energy consumption” of 95% or higher.

  1. Review the data

Your report should examine how much energy your business uses and how energy-efficient it is. It should include suggestions for potential improvements to your company’s energy efficiency and include information on their costs and advantages. For more information, please visit EIC Route Zero.

  1. Request that a lead assessor review the report

According to the ESOS regulations, a certified lead assessor is required to review your report. Several situations constitute an exception to this rule:

  • If ISO 50001 certification already covers 100% of your energy use
  • If the company uses less than 40,000 kWh of energy annually

If you have no energy supply (although you will still need to notify the Environment Agency and get a director to confirm this). Before approving it, the corporate directors and the lead assessor should both evaluate your report.


HOW CAN EIC HELP WITH YOUR COMPLIANCE NEEDS?

Our carbon team have extensive experience with complex compliance legislation and are dedicated to helping you reach deadlines efficiently. Our Lead Assessors and highly trained Auditors are on hand to assist you throughout your compliance process.

We have assisted over 550 clients with their ESOS journey, and in doing so have identified 4.65 million tonnes worth of CO2 savings. This has meant that our clients have avoided approximately £80 million worth of fines over phase 1 and 2.

Whilst balancing other jobs and responsibilities, schemes may seem like a hassle. Fortunately, EIC can help turn that obligation into an opportunity for your organisation.

Get in touch or call us on 01527 511757 to find out how we can help you start your compliance journey.

Share to :

More News

You might also be interested in these posts

FAQs

See a selection of our most frequently asked questions.

Which suppliers does EIC work with?

EIC stands out from other energy consultancies because we’re completely independent.

This independence allows us to offer supply options from a wide range of energy suppliers, all of whom are unrelated.

Our energy advice is unbiased, giving you the freedom to make informed decisions for your business.

We have a proven track record of skilfully negotiating cost-effective contracts, ensuring you consistently get the best energy prices when you partner with us.

What if I am already with an energy consultancy?

If you’re already working with an energy consultancy, it’s a good idea to start exploring your options well in advance, preferably 18 to 24 months before your current supply contract expires.

It’s essential to distinguish between your energy supply contract and your energy consultancy agreement.
You have the flexibility to switch your energy consultancy while keeping your current energy supplier intact.

What happens after the energy procurement step?

Our comprehensive account managed service provides our clients with peace of mind throughout the entire energy procurement process.

When you choose our fixed energy procurement service, we’ll assign an account manager to you, someone equipped with the expertise and abilities to provide a customised solution that aligns with your unique needs and requirements.

The professionals who make up our dedicated procurement team are well-versed in resolving inquiries and skilled in engaging with energy suppliers to negotiate contracts on your behalf.

When is the best time to renew my energy contract?

The timing for transitioning to a new energy contract is flexible; you aren’t bound by a fixed schedule or renewal date.

Given the ongoing high volatility in the global energy market, it’s increasingly crucial to look beyond traditional renewal dates when contemplating a new contract.

]]>
https://eic.co.uk/esos-phase-3-qualification-date-has-passed-and-compliance-is-critical/feed/ 0
Explaining Tm44 Inspections: The What, Who, When And Why https://eic.co.uk/explaining-tm44-inspections-the-what-who-when-and-why/ https://eic.co.uk/explaining-tm44-inspections-the-what-who-when-and-why/#respond Thu, 05 Jan 2023 15:37:00 +0000 https://eic.co.uk/?p=7656

Explaining TM44 Inspections Guide

WHAT IS TM44?

TM44 is the accepted guidance for the UK for judging the efficiency of air-conditioning units.

The key role of the guidance is to support inspections to comply with the Energy Performance of Buildings Directive (EPBD).

However, they can provide assistance to any building owner or manager desiring further data on the efficiency of their air-conditioning system.

The EPBD was initiated in 2003 and replaced a decade later by a recast Directive.

The legislation required that European members devise ‘measures to establish a regular inspection of air-conditioning systems of an effective rated output of more than 12 kW’.

Business HVAC

WHO NEEDS A TM44?

Not all air-conditioning systems are equal; TM44 focuses on those that use refrigerants for cooling, and parts of other cooling methods such as cooled decks/ceiling slabs or those using aquifers for cooling.

The 12kW figure is a good rule of thumb, making any building owner or manager with a system of that scale subject to TM44. It is important to note that this applies to single large-scale units with an output of 12kW and to individual units that together reach or exceed 12kW.

WHEN IS A TM44 NECESSARY?

Inspections timings are relevant here since each mandatory inspection must take place within five years of the previous one. According to TM44 guidance, the initial inspection must satisfy the following criteria:

  • Any system that began service on or after 1st January 2008, must have undergone an initial inspection within five years of the date service began.

  • Systems whose output exceeds 250kW must have undergone inspection no later than 4th January 2009.

  • Systems with a service start date prior to 1st January 2008 and whose output exceeds 12kW must have received inspection by 4th January 2011.

    From 6 April 2012, all TM44 air-conditioning inspection reports have been required to be lodged on the Ministry of Housing, Communities & Local Government Energy Performance of Buildings Register where a report and certificate are generated. Accredited assessors and members of the public may access this site to view and download their TM44 certificates and reports.

WHY IS TM44 IMPORTANT?

There are several benefits to having a TM44 inspection.

Firstly, a company can avoid penalties for non-compliance. These penalties are costly, inviting a £300 fine per offence – meaning either a non-complying building or multiple units inside a single structure whose combined output is more than 12kW, and if an organisation fails to supply a copy of their inspection report within seven days of request by an enforcement authority, they can incur an additional fixed penalty of £200 per building or unit. Enforcement Officers can check at any time whether a building or unit is compliant.

TM44 is an excellent data gathering opportunity about a major source of utility costs, offering insight on how to:

  • Improve efficiency
  • Reduce electricity consumption
  • Decrease operating costs
  • Diminish carbon emissions
  • Reduce maintenance needs
  • Improve controls and settings
  • Identify technical flaws

    The report will also highlight opportunities such as:

  • Improvement to operation
  • Improvements to replace less efficient systems
  • Replacement of oversized systems (scale of the system relative to cooling load)
  • When viewed with these gains in mind, TM44 can be thought of a necessary process that yields significant benefits down the line.

SECURING YOUR TM44 WITH EIC

The EIC team were among the first to receive UK accreditation for the delivery of air–conditioning inspections and actively follow any legislative changes so they can keep businesses ahead of the game.

The team can also provide Wrap Reports as standard, offering an overview of essential report findings including reference pictures, additional relevant data and a complete asset list of equipment found.

Alongside this extensive experience, clients will receive additional complimentary intelligence in other areas of sustainable improvement. EIC’s expertise in other fields like Energy Contract Procurement and Intelligent Building Management will position organisations to undertake other sustainable development projects seamlessly, with guidance and security.

For a full breakdown of EIC’s compliance services, and how your organisation can acquire TM44 Certification, get in touch with the EIC team here.

Share to :

More News

You might also be interested in these Posts

FAQs

See a selection of our most frequently asked questions.

Which suppliers does EIC work with?

EIC stands out from other energy consultancies because we’re completely independent.

This independence allows us to offer supply options from a wide range of energy suppliers, all of whom are unrelated.

Our energy advice is unbiased, giving you the freedom to make informed decisions for your business.

We have a proven track record of skilfully negotiating cost-effective contracts, ensuring you consistently get the best energy prices when you partner with us.

What if I am already with an energy consultancy?

If you’re already working with an energy consultancy, it’s a good idea to start exploring your options well in advance, preferably 18 to 24 months before your current supply contract expires.

It’s essential to distinguish between your energy supply contract and your energy consultancy agreement.
You have the flexibility to switch your energy consultancy while keeping your current energy supplier intact.

What happens after the energy procurement step?

Our comprehensive account managed service provides our clients with peace of mind throughout the entire energy procurement process.

When you choose our fixed energy procurement service, we’ll assign an account manager to you, someone equipped with the expertise and abilities to provide a customised solution that aligns with your unique needs and requirements.

The professionals who make up our dedicated procurement team are well-versed in resolving inquiries and skilled in engaging with energy suppliers to negotiate contracts on your behalf.

When is the best time to renew my energy contract?

The timing for transitioning to a new energy contract is flexible; you aren’t bound by a fixed schedule or renewal date.

Given the ongoing high volatility in the global energy market, it’s increasingly crucial to look beyond traditional renewal dates when contemplating a new contract.

]]>
https://eic.co.uk/explaining-tm44-inspections-the-what-who-when-and-why/feed/ 0
4 TYPES OF CARBON OFFSET PROJECTS https://eic.co.uk/4-types-of-carbon-offset-projects/ https://eic.co.uk/4-types-of-carbon-offset-projects/#respond Thu, 05 Jan 2023 15:37:00 +0000 https://eic.co.uk/?p=7318

FOUR MAIN TYPES OF CARBON OFFSET PROJECTS

Resource efficiency and sustainability are already integral to a business’s resiliency. All evidence points to carbon offsets becoming the next piece of the puzzle.

Climate-related policy change and litigation are on the rise across the world. It is clear that the involvement of the business sector in reducing global emissions will soon be unavoidable. This means that companies will have to take responsibility for their carbon footprint. Becoming eco-conscious will give a reputational advantage, as well as future security.

There are concerns around carbon offsets being used as a tool for “greenwashing.” This is a term used for a company masking its unethical behaviour with a green veil of traded carbon credits or PPAs. This is a valid concern, and shouldn’t be taken lightly. But as we move further and faster towards a net zero economy, genuine “greenness” will carry more weight.

While there are shades of green when it comes to the carbon market, carbon offsetting projects can facilitate valuable environmental and social projects. The benefits of which can extend above and beyond the initial reduction in carbon.

Carbon Offsetting

HOW DO CARBON OFFSET PROJECTS AND CREDITS WORK?

Every tonne of emissions reduced by an environmental project creates one carbon offset or carbon credit. Companies can invest in these projects directly or buy the carbon credits in order to reduce their own carbon footprints.

Carbon credits are tradeable on the market and can be controversial in how easy they are to attain. However, the concept is the same: a company is more or less investing in a green project in order to balance their own emissions.

FORESTRY AND CONSERVATION

Reforestation and conservation have become very popular offsetting schemes. Credits are created based on either the carbon captured by new trees or the carbon not released through protecting old trees. These projects are based all across the world, from growing forests right here in the UK to replanting mangroves in Madagascar, to “re-wilding” the rainforests of Brazil.

Forestry projects are not the cheapest offset option, but they are often chosen for their many benefits outside of the carbon credits they offer. Protecting eco-systems, wildlife, and social heritage is significant for companies offsetting their carbon emissions for the corporate social responsibility (CSR) element.

There is some grey area in forestry offsetting. In the past, it has been difficult to distinguish just how much carbon is being reduced through forestry projects. Fortunately, thanks to emerging new technologies, methods of sustainable reforestation and calculating the benefits have greatly improved.

RENEWABLE ENERGY

Renewable energy offsets help to build or maintain chiefly solar, wind or hydro sites across the world. By investing in these projects, a company is boosting the amount of renewable energy on the grid, creating jobs, decreasing reliance on fossil fuels, and bolstering the sector’s global growth.

Take, for example, The Bokhol Plant in Senegal. This project is one of the largest of its kind in West Africa, providing 160,000 people with access to renewable energy. It also saves the government $5 million a year and creates jobs in the region. Plus, the profits from selling carbon credits are often fed back into local community projects.

COMMUNITY PROJECTS

Community projects often help to introduce energy-efficient methods or technology to undeveloped communities around the world. There are many potential benefits to these projects that far surpass carbon credits. Projects like this do not only help to make entire regions more sustainable, they can provide empowerment and independence that can lift communities out of poverty. This means that projects that were, at one time, purely philanthropic can now provide organisations with direct benefits like carbon credits.

For example, the female-led Water, Sanitation and Hygiene (WASH) project in Ethiopia provides clean water to communities by fixing and funding long-term maintenance for boreholes. How does this reduce carbon emissions? Families will no longer have to burn firewood to boil water, which will protect local forests, prevent carbon emissions and reduce indoor smoke pollution. In addition to the health and environmental benefits, the project is managed by female-led committees that provide work to local women.

The Darfur Sudan Cookstove Project replaced traditional cooking methods like burning wood and charcoal often inside the home, with low smoke stoves in Darfur, Sudan. This works to reduce the damaging health effects and emissions of indoor smoke, as well as the impacts of deforestation. This project also employs women in the region and helps to empower women and girls who now spend less time collecting firewood and cooking.

WASTE TO ENERGY

A waste to energy project often involves capturing methane and converting it into electricity. Sometimes this means capturing landfill gas, or in smaller villages, human or agricultural waste. In this way, waste to energy projects can impact communities in the same way efficient stoves or clean water can.

One such project in Vietnam is training locals to build and maintain biogas digesters which turn waste into affordable, clean and sustainable energy. This reduces the methane released into the atmosphere. And helps protect their local forests which would otherwise be depleted through sourcing firewood.

WHEN AND WHY ARE CARBON OFFSETS USED?

Energy efficiency, clean energy usage, and sustainable business strategies can be very effective in reducing an organisation’s emissions.

But there are various scopes to the greenhouse gas emissions that organisations must consider.


Scope 1:
Direct emissions from company operations such as company vehicles or factories


Scope 2:
Indirect emissions from company operations such as purchased electricity generated by fossil fuels


Scope 3:
Indirect emissions from company supply chains such as shipping, business travel, and raw material extraction


Completely eliminating carbon emissions through mitigation methods is not always possible. That’s where carbon offsetting comes in.

HOW CAN EIC HELP REDUCE YOUR CARBON FOOTPRINT?

It is important to take steps to reduce your carbon footprint as much as possible before considering carbon offsets. Carbon credits should certainly not be used to buy an organisation a clean conscience or create a mirage of sustainability for consumers and/or clients. Carbon offsetting is a valuable tool, and when used to supplement a company’s mitigation efforts, creates a genuinely sustainable and resilient foundation.

At EIC Partnership, we offer comprehensive energy and carbon services to help reduce our clients’ carbon footprint in a sustainable way. Our team of experts can help advise on energy efficiency, clean energy solutions, monitoring carbon emissions, and carbon credits.

To learn more about our services contact us at EIC Partnership

Share to :

More News

You might also be interested in these Posts

FAQs

See a selection of our most frequently asked questions.

Which suppliers does EIC work with?

EIC stands out from other energy consultancies because we’re completely independent.

This independence allows us to offer supply options from a wide range of energy suppliers, all of whom are unrelated.

Our energy advice is unbiased, giving you the freedom to make informed decisions for your business.

We have a proven track record of skilfully negotiating cost-effective contracts, ensuring you consistently get the best energy prices when you partner with us.

What if I am already with an energy consultancy?

If you’re already working with an energy consultancy, it’s a good idea to start exploring your options well in advance, preferably 18 to 24 months before your current supply contract expires.

It’s essential to distinguish between your energy supply contract and your energy consultancy agreement.
You have the flexibility to switch your energy consultancy while keeping your current energy supplier intact.

What happens after the energy procurement step?

Our comprehensive account managed service provides our clients with peace of mind throughout the entire energy procurement process.

When you choose our fixed energy procurement service, we’ll assign an account manager to you, someone equipped with the expertise and abilities to provide a customised solution that aligns with your unique needs and requirements.

The professionals who make up our dedicated procurement team are well-versed in resolving inquiries and skilled in engaging with energy suppliers to negotiate contracts on your behalf.

When is the best time to renew my energy contract?

The timing for transitioning to a new energy contract is flexible; you aren’t bound by a fixed schedule or renewal date.

Given the ongoing high volatility in the global energy market, it’s increasingly crucial to look beyond traditional renewal dates when contemplating a new contract.

]]>
https://eic.co.uk/4-types-of-carbon-offset-projects/feed/ 0
Nuclear Fusion: Everything You Need to Know https://eic.co.uk/nuclear-fusion-everything-you-need-to-know/ https://eic.co.uk/nuclear-fusion-everything-you-need-to-know/#respond Thu, 27 Jan 2022 14:26:00 +0000 https://eic.co.uk/?p=8843 Read more…]]>

Nuclear Fusion: Everything You Need to Know

Overview

Nuclear energy has been helping to power our homes and businesses for over 65 years but it has had its problems. There have been two infamous accidents and the nuclear waste from day-to-day use will remain hazardous for thousands of years. Nuclear fusion aims to solve these problems. So, how does it work and could it be the future of energy production?

How does nuclear fission work?

Nuclear fission power plants generate electricity by splitting the atom. The immense power released from this reaction generates intense heat. This is then used to boil water and release the steam energy that drives a turbine creating electricity. Unfortunately, the process leaves behind a lot of hazardous nuclear waste material and spent fuel.

How does nuclear fusion work?

Nuclear fusion, based on the reactions that occur in the sun, could provide all the heat we get from fission without the waste. Fusion reactors smash together two light weight atoms, deuterium and tritium, under immense heat and pressure. This fusion creates a heavier atom, helium, and releases a huge amount of energy.

The main fuel for these reactors, deuterium, is found in seawater. In fact, experts say that one litre of seawater will be able to provide the same amount of energy as 300 litres of oil.

Fusion power today

There are currently a large number of ‘test’ reactors online across the globe. None of them have been designed to provide power to the grid but simply to act as proof of concept. The EU, US, Russia and Japan all have fusion reactors. Similar programs are also underway in China, Brazil, Canada, and Korea.

Currently, the leading technology uses electromagnetic technology and microwaves. Plasma fuel is injected into a doughnut shaped chamber and exposed to a powerful electric current. This superheats the plasma to temperatures above a hundred million degrees. This then completes its cycle by turning water into steam and driving a turbine.


UK based company Tokamak Energy has managed to achieve temperatures of over 150 million degrees Celsius. That’s hotter than the core of the sun, and they’re aiming to reach 180 million by the end of the year.

So, what is the problem?

To use an analogy, breaking a glass is easy, putting it back together is hard. Nuclear fusion is limited by the same principle. Splitting an atom is simple, fusing two together is a huge scientific challenge.

Efficiency is currently the biggest issue. Existing fusion reactors use more energy than they produce. No reactor in the world has managed to achieve positive net energy, or actually break even. But with new advancements occurring almost every month the future looks brighter than ever.

Scientists have created a rating system for nuclear fusion called the Q rate. To put it simply, a Q rating of 1 means that for every kilowatt of power the machine uses it generates an equal amount of electricity. Achieving a Q rate above ‘1’ means fusion power is a viable method of power generation.

The current record holder in the race for positive output is the JET reactor here in the UK. In 1997 they managed a 67% return on power input (a Q rating of .67). Unfortunately, it isn’t a simple case of reaching above 100%. To provide energy for public use a reactor needs to offer energy at a reasonable price. This is what experts refer to as “economic breakeven”. Currently, science is aiming for a 5x return on power or a Q rating of 5. There’s some way to go yet to turn 67% into 500%.

Timeline for the future

There’s an old joke among scientists: “Fusion power is only thirty years away, and always will be.” While this may have been true in the past, modern research has propelled us 20 years closer. In 2019 British researchers aimed to make fusion a reality by 2040, this year they say it will happen by 2030.

While fusion may not be a certainty at the moment, many scientists believe it is worth the investment. Recently more and more private businesses and investors have been turning their attention to fusion. The potential returns for the first firm to achieve viable fusion power generation are huge.

Where does EIC Partnership come in

At EIC Partnership, we are always looking to the future and keeping our clients ahead of the curve. We have our finger on the pulse of the energy sector, and welcome any innovations that will help us work towards a net zero future.

Our passionate team of energy specialists are experienced at navigating the ever-changing energy landscape. To learn more about how we can future-proof your organisation, contact us at EIC Partnership today.

Share to :

More Blogs

You might also be interested in these blogs

FAQs

See a selection of our most frequently asked questions.

Which suppliers does EIC work with?

EIC stands out from other energy consultancies because we’re completely independent.

This independence allows us to offer supply options from a wide range of energy suppliers, all of whom are unrelated.

Our energy advice is unbiased, giving you the freedom to make informed decisions for your business.

We have a proven track record of skilfully negotiating cost-effective contracts, ensuring you consistently get the best energy prices when you partner with us.

What if I am already with an energy consultancy?

If you’re already working with an energy consultancy, it’s a good idea to start exploring your options well in advance, preferably 18 to 24 months before your current supply contract expires.

It’s essential to distinguish between your energy supply contract and your energy consultancy agreement.
You have the flexibility to switch your energy consultancy while keeping your current energy supplier intact.

What happens after the energy procurement step?

Our comprehensive account managed service provides our clients with peace of mind throughout the entire energy procurement process.

When you choose our fixed energy procurement service, we’ll assign an account manager to you, someone equipped with the expertise and abilities to provide a customised solution that aligns with your unique needs and requirements.

The professionals who make up our dedicated procurement team are well-versed in resolving inquiries and skilled in engaging with energy suppliers to negotiate contracts on your behalf.

When is the best time to renew my energy contract?

The timing for transitioning to a new energy contract is flexible; you aren’t bound by a fixed schedule or renewal date.

Given the ongoing high volatility in the global energy market, it’s increasingly crucial to look beyond traditional renewal dates when contemplating a new contract.

]]>
https://eic.co.uk/nuclear-fusion-everything-you-need-to-know/feed/ 0